All our benches are produced using corrosion resistant materials to ensure long life and trouble free operation in greenhouse environments. The tops are made from aluminium profiles and the legs from hot dip galvanised steel.
Benches are sized to suit the application and are typically approx 1600mm wide, 800mm above ground level with the length to suit the greenhouse or compartment. The legs are height adjustable and for roller bench installations, the spacing between benches is typically 50mm.
Legs are hot dip galvanised steel tube and are spaced 2.00 to 2.50m apart
Feet are height adjustable
The useable depth of the bench top is 70mm
For ebb/flood systems, we install a 3mm polystyrene plates for use with
All benches need to be set in concrete or securely fixed to a concrete floor.
Standard benches are designed for a load of 60kg/m2. For heavier applications, loads of 110kg/m2 and above may be specified.
All steel elements are commercial steel profiles which, only after being fabricated & drilled are hot dip galvanised according to NBN 107/001-008 (zinc layer 450 to 550 g/m2, single-sided).